Interactive 3D System Guides
Commercial Roofing Systems — Compare Every Assembly in Interactive 3D
Most roofing companies hand you a brochure. We built every system we install as an interactive 3D model — rotate the assembly, pull the layers apart, and watch the complete installation play out step by step, exactly the way our crews do it in the field.
Pick a system below to explore it, or call (912) 312-0507 and we'll tell you which assembly actually fits your building, your budget, and your asset-hold horizon.
Pick a System to Explore
TPO Single-Ply
The most-installed commercial roof in America — mechanically attached, heat-welded seams.
Explore in 3D →PVC Single-Ply
Chemical-resistant membrane for restaurants, cold storage, and food-service rooftops.
Explore in 3D →EPDM Rubber
The proven fully-adhered rubber membrane for retrofits and large open fields.
Explore in 3D →Standing-Seam Metal
Concealed-clip panels for churches, historic buildings, and 40+ year asset holds.
Explore in 3D →Acrylic Coating
Restoration over an aging roof — the most economical 10-15 year extension.
Explore in 3D →Side by Side
| System | Best For | Service Life | Key Advantage |
|---|---|---|---|
| TPO Single-Ply | Warehouses, retail, offices, schools | 20-25 yr | Heat-welded seams, ENERGY STAR white |
| PVC Single-Ply | Restaurants, cold storage, hospitals | 20-30 yr | Chemical / grease resistant |
| EPDM Rubber | Retrofits, large open fields | 20-30 yr | Fully adhered, proven chemistry |
| Standing-Seam Metal | Churches, historic, 40+ yr holds | 40-50 yr | Concealed clips, zero surface fasteners |
| Acrylic Coating | Aging-but-intact existing roofs | 10-15 yr | 30-50% of reroof cost, renewable |
Common Questions
Which commercial roofing system is best?
There is no universal best — there's a best fit for your building. TPO wins on clean rooftops for value, PVC wins under grease and chemical exposure, EPDM wins on retrofit compatibility, standing-seam metal wins on lifespan and aesthetics, and a coating wins when the existing roof just needs more years.
What do the 3D models actually show?
Each model is the real assembly our crews install — actual layer thicknesses, fastener plate patterns, seam construction, and flashing details — with a step-by-step install animation that follows the same sequence as a real project.
How do I know which system my building needs?
Start with three questions: what's on the roof now, what does the rooftop environment expose it to (grease, chemicals, foot traffic), and how long do you plan to hold the asset. Or skip ahead — we answer all three in a free inspection.
Ready When You Are
Not sure which system fits? We are.
Free inspection, straight answers, and a spec matched to your building — not a one-size-fits-all pitch.